Skip to the sheet
Printerz
English
EnglishالعربيةFrançaisEspañolPortuguês中文Deutsch
Fixes

Vertical lines on the page

Print at 100% or Actual size. Turn off Fit to page. Then measure the 100 mm bar.

This pattern is a visual aid. Nozzle cleaning and hardware alignment stay in the printer’s own menu or driver.

  1. Print the vertical-line sheet.
  2. A line that stays in one horizontal position is different from a nozzle gap.
  3. Photographing the page under a lamp can invent a line. Look at the paper.
RelatedPrinter prints blank pagesPrinter prints linesPrinter colors look wrongPrint looks faded

What this checks

Vertical lines on the page. Vertical marks: print the vertical-line sheet and see if the mark stays put.

Change one thing, then print again. A new cable, a paused queue, and a wrong paper size can look like a dead printer.

A browser can draw a page and hand it to the print dialog. It cannot talk to the printhead, read a toner chip, or start a cleaning cycle. Those commands belong to the printer and its driver. If a button on this site cleaned your nozzles, it would be pretending.

How to use it

When a length matters, print at 100 percent or Actual size. Turn off Fit to page, Shrink to fit, and Scale to fit. Then put a ruler on the 100 mm bar. If that bar is not 100 mm, every other judgment about size is early. The preview on the screen is scaled to fit the window. Only the paper counts.

The screen is red, green, and blue light. The printer is ink or toner on a sheet. They will not match, and this site does not build an ICC profile. Use the patches to see whether a color is missing or wildly shifted, not to approve a brand color.

A gap in a single color row points at that color: the nozzles, the cartridge, or a setting that turned the color off. A gap that cuts every color in the same place can be a scratch, a dirty roller, or damage in the scan you photographed. A whole page that is pale is a different problem again: draft mode, a low supply, or the wrong paper type. One sheet does not name the part.

What it cannot prove

On a laser printer, a mark that repeats down the page often matches the circumference of a drum, a roller, or a fuser. This page will not tell you which. Write down the distance between repeats and stop there. On an inkjet, a thin white line through one color is more often a nozzle. Do not swap those stories.

If nothing prints, the pattern is irrelevant. Check the queue, the selected printer, and whether the device is paused or offline. Then print the operating system’s own test page. A page from Windows, macOS, or the printer panel that also fails is not a problem with this website.

Borderless printing is a printer feature, not a browser feature. Edge bars that stop short of the knife are the unprintable margin or a scale setting. Forcing borderless in the driver can also scale the page. Measure the bar after you change that setting.

Questions

The page is blank. Is the printer broken? Often the queue is paused or the supply is empty. Print the system test page before you open the cover.

Colors are wrong only in one program. Then the program or its profile is the suspect, not the nozzles.

It prints crooked. Look at the paper guides and the stack before you run an alignment.